Ventum NS1 Ultegra Di2

Ventum

NS1Ultegra Di2

FrameVentum NS1 road frame | F…Ventum NS1 fork | Tapered c…
GroupsetShimano Ultegra Di2 | 2…Shimano Ultegra | CS-R810…
WheelsZIPP 303 SW carbon fibe…Schwalbe One | Performance…
Tire clearance35 mm

The 2026-present Ventum NS1 is a substantial redesign rather than a light refresh. Ventum retained several practical features from the previous platform—T47 threaded bottom bracket, flat-mount disc brakes, UDH compatibility, full internal routing, and clearance for 700x35c tires—but reshaped the bike around a more aggressive aero front end. The defining visual and functional changes are the deeper leading edge projecting ahead of the steerer, an hourglass-shaped head tube, and deeper fork legs, paired with a lighter higher-modulus layup. That combination places the NS1 squarely in the modern aero-road category: a race-oriented bike that still acknowledges current expectations around serviceability and tire clearance.

Ventum NS1
Build
Size
01 / Buy

Where to get it.

1 retailer · size S.

Size
1 retailer · Size S
02 / Specifications

Spec sheet.

Every component shipped with this build.

01Frameset
2 components
FrameVentum NS1 road frame | Full carbon fiber construction | Internal cable routing | T47 threaded BB | Flat mount disc brake | UDH
ForkVentum NS1 fork | Tapered carbon steerer | Internal brake routing | Flat mount disc brake | Carbon dropouts
02Drivetrain & brakes
11 components
Bottom bracketShimano T47 Outboard
Front brakeShimano Ultegra Di2 | Hydraulic
Front rotorShimano Ultegra | RT-MT800 Centerlock | 160mm
Rear rotorShimano Ultegra | RT-MT800 Centerlock | 140mm
04Cockpit & contact
5 components
StemXS: Ventum CR2 one-piece cockpit | 90mm stem length; S: Ventum CR2 one-piece cockpit | 90mm stem length; M: Ventum CR2 one-piece cockpit | 90mm stem length; M/L: Ventum CR2 one-piece cockpit | 90mm stem length; L: Ventum CR2 one-piece cockpit | 100mm stem length; XL: Ventum CR2 one-piece cockpit | 100mm stem length
HandlebarsXS: Ventum CR2 one-piece cockpit | 40cm bar width; S: Ventum CR2 one-piece cockpit | 40cm bar width; M: Ventum CR2 one-piece cockpit | 42cm bar width; M/L: Ventum CR2 one-piece cockpit | 42cm bar width; L: Ventum CR2 one-piece cockpit | 42cm bar width; XL: Ventum CR2 one-piece cockpit | 44cm bar width
SeatpostVentum carbon post | 10mm offset
Grips/TapeFSA Powertouch, black
03 / Geometry

Geometry & fit.

6 sizes published.

The NS1's geometry is contemporary but not extreme. Across the core sizes, the bike uses a consistent 410 mm chainstay and 69 mm BB drop, with a 73-degree head tube angle on M through XL. Reach numbers are moderate for an aero road bike—388 mm in M, 397 mm in M/L, 405 mm in L—while stack rises from 541 mm in M to 615 mm in XL, reflecting Ventum's stated move toward slightly taller stack and reach, especially in the larger sizes. In practice, that should give riders a race-capable position without pushing the fit as low and long as some pure WorldTour-style aero frames.

Reach × Stack · size Smm

Where the handlebar sits relative to the bottom bracket — the single most important fit pair.

630588545503460STACK ↑335359383406430REACH →ENDURANCERACE / AEROSize S378 · 515
01Fit geometry6 values
Stack515 mm
Reach378 mm
Top tube531 mm
Headtube length110 mm
Standover height745 mm
Seat tube length448 mm
02Component geometry5 values
Crank length170 mm
Handlebar width400 mm
Stem length90 mm
Saddle width140 mm
Seatpost offset10 mm
03Handling geometry8 values
Headtube angle72°
Seat tube angle73.5°
BB drop69 mm
Trail64.5 mm
Offset45 mm
Front center574 mm
Wheelbase974 mm
Chainstay length410 mm

Which size should I buy?

Slide your height to see the recommended size. GearWise's fit algorithm works from the published stack, reach, and ETT — the brand's own recommendation may differ.

Your height
5'8"173 cm
5'0"5'5"5'10"6'3"6'7"
Recommended sizeSBased on stack, reach & ETT for your height · score 38/100.

Calculated from GearWise's own stack / reach / ETT algorithm — the brand's size chart may recommend a different size, and a proper bike fit beats any calculator.

04 / Other builds

The lineup.

5 builds, ranging $5,599 – $11,299.

The NS1 range spans from a $5,599 Rival AXS model to flagship builds at $10,999 for Red AXS and $11,299 for Dura-Ace Di2. In the middle of the range, Force AXS is priced at $7,599 and Ultegra Di2 at $7,899, giving buyers a fairly clear split between more attainable electronic-shifting builds and premium top-tier options. The pricing structure suggests Ventum is offering the same core frame platform across the line while letting drivetrain level define most of the jump in cost.