Orbea Rallon E10

Orbea

RallonE10

FrameOrbea Rallon OMR. 442mm c…Fox 38 Float Factory 180, G…
GroupsetShimano SLX M7100 I-Spe…Shimano CS-M7100 10-51t 1…
WheelsRace Face AR 30c Tubele…Maxxis High Roller III 2.40…

The current Rallon is no longer just an enduro bike with a gravity bias; it is a shared gravity platform that underpins both the 170mm rear / 180mm fork enduro bike and the 200mm DH version. Orbea’s own technical documentation and product structure make that clear, and the key distinction is in the GravityLink and shock configuration rather than a completely separate chassis. That gives the 2026-generation Rallon a notably modular identity in the market: one OMR frame family aimed at riders who want a race-oriented enduro bike, a park-ready DH bike, or a platform that sits very close to both worlds.

Orbea Rallon
Build
Size
01 / Buy

Where to get it.

2 retailers · size M.

Size
2 retailers · Size M
02 / Specifications

Spec sheet.

Every component shipped with this build.

01Frameset
3 components
FrameOrbea Rallon OMR. 442mm chainstay length. Concentric Boost 12x148 rear axle. Pure Gravity geometry. Attitude Adjust. ISCG05
02Drivetrain & brakes
10 components
03Wheels & tires
4 components
Rear tireMaxxis Minion 2.40" 120 TPI 3CT/DD/TR MaxxTerra
04Cockpit & contact
5 components
StemOC Mountain Control MC11 Alu SL, 0º; Stem Length: S: 35mm, M/L: 40mm, XL: 50mm
HandlebarsOC Mountain Control MC30, Rise20, Width 800
SeatpostOC Mountain Control MC22, 31.6mm, Dropper; Travel: S/M: 200mm, L/XL: 230mm
Grips/TapeOC Lock On
03 / Geometry

Geometry & fit.

4 sizes published.

The published geometry points to a modern gravity setup with a clear emphasis on stability and steep seated positioning. Across the size range, the head tube angle is 64.3 degrees and the bottom bracket drop is 28mm, both consistent with a bike intended for steep, high-speed descending. Reach figures of 430mm (S), 455mm (M), 478mm (L), and 505mm (XL) are contemporary without being extreme, while the wheelbase grows from 1209.9mm in S to 1298mm in XL. Combined with the standard 442mm chainstay, that should give the bike a planted front-center and predictable composure at speed.

Reach × Stack · size Mmm

Where the handlebar sits relative to the bottom bracket — the single most important fit pair.

710669628586545STACK ↑385421458494530REACH →UPRIGHTLONG / LOWSize M455 · 638.2
01Fit geometry6 values
Stack638.2 mm
Reach455 mm
Top tube574.5 mm
Headtube length110 mm
Standover height756 mm
Seat tube length405 mm
02Component geometry5 values
Crank length165 mm
Handlebar width800 mm
Stem length40 mm
Saddle width145 mm
Dropper travel200 mm
03Handling geometry7 values
Headtube angle64.3°
Seat tube angle79.4°
BB height352.5 mm
BB drop28 mm
Offset44 mm
Wheelbase1239.3 mm
Chainstay length442 mm

Which size should I buy?

Slide your height to see the recommended size. GearWise's fit algorithm works from the published stack, reach, and ETT — the brand's own recommendation may differ.

Your height
5'8"173 cm
5'0"5'5"5'10"6'3"6'7"
Recommended sizeMBased on stack, reach & ETT for your height · score 71/100.

Calculated from GearWise's own stack / reach / ETT algorithm — the brand's size chart may recommend a different size, and a proper bike fit beats any calculator.

04 / Other builds

The lineup.

4 builds, ranging $4,299 – $9,999.

Orbea offers the enduro Rallon in four builds spanning a wide price range: the base Enduro model at $4,299, the E10 at $5,699, the E-Team at $7,199, and the E-LTD at $9,999. That spread puts the bike into several parts of the enduro market, from a comparatively accessible complete bike up to a premium flagship build.

01
E-LTD build
E-LTD
$9,999
02
E-Team build
E-Team
$7,199
03
E10 build
· Currently viewingE10
$5,699On this page
04
Enduro build
Enduro
$4,299